Major Accomplishments Since Last Report:

• The regulators, filters, and lubricators for our pneumatic system have been mounted in our sealed box.
• The sealed box has been mounted to our demonstration table.
• We've decided that the cylinder will be mounted to the bottom of the base plate.
• An air cylinder has been ordered and should be arriving in the next few days.
• Part of the new tooling has been mounted on the base plate.

• We need to do some more testing with various air cylinder bore diameters in order be sure of the correct size to use.  We believe that we'll need a bore diameter of 3.5" because of some crude testing done in the past.

• Acquire air cylinder samples and do some testing.
• Run the wiring from our control box to the solenoid valves.
• Get the remaining tooling mounted to the base plate.